Computation, Vol. 12, Pages 93: Elasto-Plastic Analysis of Two-Way Reinforced Concrete Slabs Strengthened with Carbon Fiber Reinforced Polymer Laminates
Computation doi: 10.3390/computation12050093
Authors: Zahraa Saleem Sharhan Majid Movahedi Rad
This study explores a technique for enhancing the punching strength of reinforced concrete (RC) flat slabs, namely carbon fiber reinforced polymer (CFRP). Four large-scale RC flat slabs were fabricated, to assess the efficacy of this strengthening method. One slab served as a reference and the three other specimens were strengthened with CFRP, as a method of external strengthening. These slabs, featuring identical overall dimensions and flexural steel reinforcement, underwent testing until failure, under the influence of concentrated patch loads. A concrete plastic damage constitutive model (CDP) was developed and employed to examine the strength of two-way RC slabs. Additionally, to enhance the strength of existing RC slabs, carbon fiber reinforced polymer (CFRP) strips are affixed to the tension surface of the sections. The research begins with the calibration of a numerical model, based on data from laboratory tests. The objective of this study is to constrain the plastic behavior of two-way RC slabs reinforced with CFRP, with a focus on establishing an optimal elasto-plastic analysis, aimed at controlling concrete damage plasticity using CFRP, and employing a plastic limit load multiplier. Subsequently, a series of numerical simulations, incorporating different variables, are conducted to investigate shear behavior. The numerical results indicate that an increase in the strengthening ratio has a significant impact on shear strength. Finite element simulations are carried out using Abaqus CAE®/2018.