Processes, Vol. 11, Pages 325: Preparation of Polymer Solution for Profile Control and Displacement Using Wastewater with High Ca2+/Mg2+ and Fe2+ Concentrations

Processes, Vol. 11, Pages 325: Preparation of Polymer Solution for Profile Control and Displacement Using Wastewater with High Ca2+/Mg2+ and Fe2+ Concentrations

Processes doi: 10.3390/pr11020325

Authors: Xuanran Li Anzhu Xu Mengqi Ma Shanglin Liu Jun Ni Lun Zhao

In the present study, we used Kalamkas, which is a typical Kazakhstani oilfield, which produces wastewater with high Ca2+/Mg2+ and Fe2+ concentrations, as a case study. We investigated a method for preparing Fe2+ polymer solutions without oxygen isolation under the conditions of salinity > 110 × 103 mg/L, Ca2+/Mg2+ concentration ˃ 7000 mg/L, and Fe2+ concentration ˃ 30 mg/L. Fe2+-resistant groups were grafted onto the molecular chains of a hydrophobically associating polymer prepared using existing synthesis technology to overcome the decrease in apparent viscosity of the polymer solution due to the oxidation of Fe2+ during solution preparation. The experiments showed that PAM-IR with iron-resistant groups can be completely dissolved in the wastewater within 180 min, and can tolerate an NaCl concentration of up to 0.23 × 106 mg/L, a Ca2+ concentration of up to 10 × 103 mg/L, an Mg2+ concentration of up to 9 × 103 mg/L, and a Fe2+ concentration of up to 90 mg/L, with favorable thickening performance and resistances to NaCl, Ca2+, Mg2+, and Fe2+. PAM-IR has good injection performance and can establish a high resistance factor (FR) and residual resistance factor (FRR) to increase the sweep efficiency. Therefore, it is potentially useful for enhancing oil recovery.