Processes, Vol. 12, Pages 1528: Research on Gas Control Technology in Goaf Based on the Influence of Mining Speed

Processes, Vol. 12, Pages 1528: Research on Gas Control Technology in Goaf Based on the Influence of Mining Speed

Processes doi: 10.3390/pr12071528

Authors: Cheng Cheng Xiao-Yu Cheng Long Chen Xing-Ying Ma

To comprehensively understand the influence of mining speed on gas emissions in goaf during coal seam extraction, enhance gas extraction efficiency in goaf, manage gas emissions at the working face, and ensure safety in the mining production process. This study focuses on the No. 3 mining area of Wangjialing Mine, employing numerical simulations to analyze the evolution of mining-induced fractures and the characteristics of gas distribution in the overburden at varying mining speeds. Furthermore, by integrating actual gas emission and extraction data at the production face, this study examines the quantitative relationship between mining speed and gas emissions in the goaf, identifying optimal regions for high-position borehole layouts and conducting borehole optimization design and investigation. The results of this study indicate that the initial caving step distance of the goaf roof increases with the advancement speed of the working face. Conversely, the maximum height of through fractures in the overburden decreases as the mining speed increases, while delamination fractures are minimally affected by the advancement speed. By categorizing and averaging data on goaf mining speed, the impact of initial and periodic pressure on gas emissions can be effectively mitigated, revealing a linear correlation coefficient of 0.94 between goaf gas emissions and mining speed. At varying mining speeds of the working face, the efficient extraction layer and horizontal distance parameters of gas extraction boreholes in the goaf conform to the linear equation y = ax ± b. Based on the research findings, an optimization design for mining face speed and high-level borehole parameters in the goaf was implemented. The average gas extraction rate of high-level directional boreholes reached 68% throughout the extraction period. Gas emissions at the working face were effectively controlled below 10 m3/min, with the maximum gas concentration at the upper corners and return airflow kept below 0.8%. This effectively managed gas emissions at the working face, ensuring safe production in the mine, providing a theoretical basis for identifying gas-rich areas in the mining-induced overburden, and enhancing gas extraction efficiency at the working face.